life ideas

December 22, 2006

教你几招对付银行里态度恶劣的工作人员!

Filed under: Uncategorized — manoftoday @ 11:04 pm

教你几招对付银行里态度恶劣的工作人员!
一、换零钱
  哥哥结婚叫我去换50张20的rmb发小红包用。
  拿了1k去银行换,sb态度极其不好的说“没有,不能换给你”
  态度实在恶劣啊。我十分凶恶的反问“你再说一次”家伙很牛的说“就是没有”
  我说“你=着”sb说“你威胁我啊”
  我拿了身份证说“开户,存1k”.
  结束了,我说“再提20”连着提了二次20。
  sb说“侬萨意思啊?”
  “cn闹钞票,闹50趟再销户不来三啊”
  sb灰溜溜的换了50张擦刮里新额20元白我,贱!!!
  (My question: 要是SB给我20个硬币甚至更小咋办?)
  二、为什么叫建行
  刚刚去医院旁边的贱行取钱,门口的取款机人很多,大家都在排队晒太阳.但是奇怪的是里
  面的营业厅却只有一个顾客.,于是我走到一个窗口,对那个长的人模狗样的职员说取800
  块。
  那个人竟然说到外面的取款机取,我问他为什么卡不能在柜台上取?
  他说5000以下都到取款机上取,说这是为了节约时间,提高效率、分流,我当时就傻了,分
  流?
  我问他,现在外面的取款机排队排的老长,这里面一个人都没有,这节约的什么效率?
  有哪个文件规定5000以下的不能在柜台取?其它的银行都可以!
  那个狗东西说是贱行的文件,我说拿给我看!他拿不出来,反正就是不给取。
  我看着外面在排队晒太阳的人,再看看里面看报纸吹空调的贱人,气不打一处来,于是我决
  定整一整他。
  我说,好,那就取5000!等他办完了,把5000给我了,我拿了一百,说存100!
  取款机上不能存钱,所以他办了。等他办完这100块,我再拿了100块,说存100!
  那个狗东西说,你不能一次存完么?
  我说我给我自己发的文件规定了,一次只能存100,怎样,不行么?我就一次存100,一次存
  100.
  慢慢的周围围了很多支持者,大家都说干的好!
  旁边马上有人也和我一样干了起来。
  最后他们的领导出来了,很嚣张的说:你们扰乱金融次序,我报警。.
  我说我是存钱啊,银行不就是存钱的地方么? 你有文件规定了一次不能存一百?拿给我看!
  旁边的很多人都支持我,大声的指责他们。
  最后那个什么领导说对不起,我们以后一定会改进工作方法。给大家方便,等等等…….
  我转身走的时候,对他说,我现在知道为什么你们是建行了,因为你很贱!
  三、招行假币
  前2天我去招行拿钱(替公司取的),结果点抄时发现有张假的100元,因为自己是学财会专业
  的加上公司以前发生案例(从银行取好钱发的工资,有人发现有假抄),所以自己特别注
  意。之后,我对柜台小姐说:小姐,你这张钱有问题。
  小姐:什么问题?
  我说:假的
  小姐:不可能,你离开过柜台了。
  我当时就火了:你眼睛有问题啊?你哪只眼睛看我离开过柜台啦?
  于是我和她便起了争执,态度可恶劣啦,好象是我故意把钱换似的,对我言辞犀利~
  我说:你们的验抄机难道有问题啊?假抄过去都不报警的啊?这样好了,我们报警处理~不
  是说发现假币打110么~!
  这时银行已经吵的沸沸扬扬了~银行行长出来了~事情还没问清楚~第一时间甩给了我一句
  话:你离开柜台了伐?离开柜台就不能证明这假抄是我们这发出来的!
  我*!我当时就觉得可笑:他是出来解决问题的吗?2话不说就把责任推干净了撒~”
  我说:我有没有离开过柜台,我说的不算~这样我们调监控录象出来看~要不我就报警
  处理,你们自己看怎么办吧~
  这个时候银行行长开始有点”软”了下来,态度也改善了不少,还面带微笑的对我说:
  那您看怎么个解决方法呢?您提个方案。
  我当时也是气了有点晕晕滴,想也没想:1罚10!冲口而出~
  银行行长:1赔10呢,不太可能,要不这样吧,打个对折怎么样?我想了想算了~
  结果最后就取了钱对着行长和那个柜台小姐说:你们以后最好记住这张脸,不要玩什么”花
  样”(很多银行有违规操作,经常把假币发出来,多数都为数字比较大的帐目上不容易发
  现。
  最后行长笑嘻嘻的把我迎出了门~
  (My question: 要是我刚离开柜台但尚未走出大门,咋办?难道我活该吃进?这也体现我们
  人权的低劣)
  四、农行的VIP
  从几个月前开始,呼和浩特农行搞个VIP窗口,只办理5W元以上的业务。有一次我想取1W块
  钱,小额窗口的队排的超长,VIP窗口空着,我就去VIP窗口办,工作人员问我取多少,我说
  取1W,她直接说,5W以下的业务去小额窗口排队。我就说,那我取6W,她说,6W可以,给我
  提出6W现金之后,我取了一W,把剩下的5W又塞回去,说:给我存5W.工作人员直接晕倒。
  五、全部提现
  还有一次在某工行,甲方一笔140W的拔款到账之后,我去工行办款。因为没有工行卡,我就
  打算办张卡把钱转存上去,结果工作人员居然说,办卡要复印身份证,他们的复印机坏了,
  要我自己去复印。我暴怒,说,算了,不存了,140W全部提现!今天晚上你们报计划吧,明
  天我来取!银行的业务部主任当时脸色就变了,然后,一个小姑娘满脸笑容的说:您把身份
  证拿来,我去给您复印,您稍等一会儿。。。嗯,当时感觉心理就平衡了。。。

Advertisements

Apple AirPort Express review , work with dd-wrt and how to hack

Filed under: Uncategorized — manoftoday @ 12:35 am

 

Link to Apple AirPort Express review : Full Review

 

http://www.downloadsquad.com/2006/12/14/how-to-setup-wds-between-a-wireless-router-and-an-airport-expres/

 

How to setup WDS between a wireless router and an AirPort Express

Posted Dec 14th 2006 11:00AM by Chris Brentano
Filed under: Features, Hardware, Macintosh, Open Source, How-Tos

WDS LoveThinking about expanding your wireless network but aren’t exactly sure how to go about it? Using my trusty Linksys WRT54G, a copy of DD-WRT and an AirPort Express, I was able to increase the range of my network, and also bridge my wife’s office upstairs with the network in the basement. Here’s how you can do it too.

Ingredients:

  • 1 Linksys WRT54G running DD-WRT
  • 1 Apple AirPort Express
  • MAC addresses of both
  • 15-20 minutes of your time

For those who don’t know, WDS stands for Wireless Distribution System. It’s a simple system that allows you to interconnect multiple access points wirelessly. Wikipedia, as always, has more information on the subject.

Before we get started, as noted above, you need to have DD-WRT installed on your Linksys WRT54G, or on any AP/Router that supports it. Have a look at DD-WRT’s hardware compatibility list to see if your hardware is supported. If you don’t have DD-WRT installed, and are using a WRT54G, see these instructions on my personal blog on how to install DD-WRT. You’ll also need to have already configured your AirPort Express.

One important note: If you want to use WDS, you can’t use WPA or WPA2 encryption. This is because with WPA and WPA2 the MAC addresses of nodes are encrypted. WEP is your only option for any encryption, so go 128-bit. You may also want to consider other security precautions, such as MAC address filtering, since WEP is trivial for even a caffeinated monkey to crack.

1. Write down the MAC address of both your WRT54G and your AirPort Express. This will likely be on the underside of the WRT54G and on the side of the AirPort Express. MAC addresses are commonly printed as 01:23:45:67:89:ab, but can sometimes be printed with dashes or without any separators.

2. Go to the DD-WRT administration panel of your Linksys WRT54G and click on the Wireless tab. From there, click the WDS sub-tab. You’ll see a list of empty MAC addresses and some extra options.

DD-WRT Control Panel

3. For the first entry in the list, select “LAN” from the drop-down menu, and then type in the MAC address of your AirPort Express. Leave “Lazy WDS” and “WDS Subnet” disabled, and then click Save Settings.

4. Now, launch the AirPort Admin Utility (located in /Applications/Utilities), select your AirPort Express in the list, and click the Configure button. At the configuration window, click the WDS tab.

Airport Admin Utility

5. Select the “Enable this base station as a WDS” option, and from the drop-down menu select “remote base station”, and also select the “Allow wireless clients on this base station” option. For the Main AirPort ID, either type in the MAC address of your Linksys WRT54G (separated with colons) or click the select button, and in the sheet that appears, select your wireless network and click OK.

Select your AP

6. Once you’re back at the main AirPort Admin Utility window, click the Update button, and then wait as your AirPort Express restarts.

Restarting...

7. Almost done. Once your AirPort Express has finished restarting, it will reappear in the list in the AirPort Admin Utility. Click Configure again and verify a few settings:

  • on the Internet tab, make sure that “Connect Using” is set to AirPort (WDS)
  • on the Network tab, make sure that “Distribute IP addresses” is shut off if you are running another DHCP server, for example on the WRT54G
  • if you have a stereo connected to your AirPort Express, enable AirTunes on the Music tab!

And that’s it! Everything should be working. Your wireless network’s range will be increased, and if you plug in a laptop, computer, or other network device (hub or switch) to the Ethernet jack on the AirPort Express, it will be bridged automatically across the wireless network. Sweet!

 

4. Got it to work – it’s only slightly different configuring from a windows machine.
1 – On “Airport” tab,
for Wireless Mode select “Create a Wireless Network (Home Router).
In Network Name give it the same network name as your wireless network’s ssid.
Put it on the same channel as your wireless network.
Hit “Wireless Security” button, and replicate the same wireless settings you are using on your wireless network – remember has to be WEP.
2. WDS tab – same as above instructions.
Viola!
My DD-WRT54GS assigned it an IP out of it’s DHCP range, which at first I thought was strange, but actually makes sense.

 

 

How to configure HyperWRT 2.1b1 with WDS – Version 2.0.
HyperWRT 2.1b1 is a custom firmware for Linksys’ WRT54G (and WRT54GS) router.  This firmware adds a few very helpful features.  Check out HyperWRT for more information.  Configuring WDS on HyperWRT is fairly straight forward and only requires a few steps.
**Note, this document assumes you are starting with a factory default configuration**
Here’s my topology:
                   Wireless Clients
                                |
Cable Modem—RouterA—–Wireless—–RouterB
                                |               WDS+WPA             |
                      Wired Clients                    Wired Clients
To get this up and running only RouterB needs to be running the HyperWRT software.  RouterA is running the stock Linksys 4.20.6 firmware.  I did it this way because I want to have the most up-to-date firmware on the router handling the Internet connection.  Thanks goes out to Traveller of the LinksysInfo.org forums for his investigation of the nas4not command to allow WPA+WDS.
On both routers the following needs to be configured.  I suggest configuring each router separately, one at a time, with a wired client:
1.  Under the Wireless –> Basic Wireless Settings configuration be sure to set the following items to the same on both routers:

RouterA’s Configuration

RouterB’s Configuration

2.  Under the Wireless –> Wireless Security configuration be sure to set everything the same on both routers for the security mode you are using.  In my scenario I’m using WPA.

RouterA’s Configuration

RouterB’s Configuration

3.  Next, you need to determine the wireless MAC address of RouterA.  To do this goto Status –> Wireless.  Write this down for future reference.
RouterA’s Wireless MAC address

4.  Now you need to configure the WDS settings on RouterB.  I think the best way to do this is through a telnet window.  To start telnet click on Administration –> Telnet Daemon –> Start Telnet.  Once that it done, you need to connect to the router through telnet.  I use putty for telnet purposes.  Once you’ve connected you should see the following:
RouterB’s telnet window

In the telnet window, enter the following commands:

  • nvram set wl_mode=wds
  • nvram set wl0_mode=wds
  • nvram set wl_lazywds=0
  • nvram set wl0_lazywds=0
  • nvram set wl_wds=00:11:22:33:44:55      <–Notice this is the wireless MAC address of RouterA
  • nvram set wl0_wds=00:11:22:33:44:55    <–Notice this is the wireless MAC address of RouterA
  • nvram commit
  • reboot

The above settings hardcode RouterB for WDS mode to RouterA.  It also saves these values to nvram so that they will remain even after a reboot / power cycle.

5.  Also on RouterB we need to configure the WPA authentication program to run when the router boots up.  Under Administration –> Management –> Startup enter the following:
RouterB’s startup script

The command is “nas4not lan wds0.2 up supplicant aes psk password linksys”.  Be sure to replace “password” and “linksys” with the WPA password and SSID you are using.  Also, if you are using TKIP instead of AES, be sure to change “aes” to “tkip”.

6.  Now that we have all the wireless configuration completed we need to take care of the basic router configuration.  See the screenshots below to see how to configure each router.

RouterA’s Configuration

RouterB’s Configuration

Be sure to click Save Settings on both routers.
Now, just reboot each router.  If you were successful you should be able to ping from a wired client on RouterA to a wired client on RouterB.
If this works for you, please let me know.

 

 

http://rgbdream.com/?p=44    Airport Update 4.2 (Airport Express v6.2) 

http://www.macosxhints.com/article.php?story=20060609053254368

 

 

How to stream music from iTunes to your PSP

Blog at WordPress.com.